1)Keyboard Shortcuts in Automatic Models Mode The Arrows allow you to place yourself on the model best suited to the location of the Cursor. Thus, depending on the model chosen, one can see or not the Foot of a building WALL for example.
The Arrows have the following meaning: - F_Left (<-) : Tries to find a model to the left of the current cursor. Blocks the automatic mode on this model.
- F_Right (->) : Tries to find a pattern to the right of the current cursor. Blocks Auto mode on this model.
- F_Top : Tries to find a model above the current cursor. Blocks Auto mode on this model.
- F_Bottom : Tries to find a model below the current slider. Blocks Automatic mode on this model.
- F_Finish : Unlocks the current Image and resumes Automatic model change.
2)Keyboard Shortcuts in Aerotriangulation [Stereo Measurements] Mode
The Arrows have the following meaning: - F_Left or F_Bottom or ENTER : Goes to the measurement on the Next point.
- (CTRL) : Blocks / Unblocks the Left Image.
- (ALT) : Blocks / Unblocks the Right Image.
3)Keyboard Shortcuts in Aerotriangulation Mode [TRAJECTOGRAPHY]
In Stereo mode the arrows have the following meaning:
- SPACE bar Goes to the next measure.
- F_Bottom Blocks/unblocks a image of the model if stereo mode
- F_Top Go to Next Point
- F_Right Go to the next right click
- F_Left Switches to the next Left Cliche
- F_Windows Block/Unblock the Terrain
In MONO mode the arrows have the following meaning:
- SPACE bar Goes to the next measure.
- F_Lower or F_High Go to the next point
- F_Right Go to the next Cliche
- F_Left Switches to the previous Cliche
- F_Windows Block/Unblock the Terrain
4) Keyboard shortcuts in Aerotriangulation Mode [ANALYZE]
In Stereo mode the arrows have the following meaning:
- F_Windows Block/Unblock the Terrain
In MONO mode the arrows have the following meaning:
- F_Windows Block/Unblock the Terrain